CDR Repowering products
- Images shown are for reference only and may not reflect the actual product received due to supplier component changes.
- Do not use the add to cart button for an item unless the item is being shipped somewhere in the United States or Canada.
- We do not sell to anyone for the purposes of resale. Do not use the add to cart button for an item unless it is being shipped to an individual from your agency/company
- For International orders please use the Contact US link found at the top of this page as shipping will need to be calculated on a case-by-case basis.
- The CDR Repowering Rig will include a set of basic instructions. There are no instructions for the other items. NO technical support or further instructions will be provided.
- Kent E. Boots & Associates shall not be liable for any injury or property damage as a result of the use any of these items regardless of the manner in which it is used.
- Current US shipping costs are $11.50 via US Priority Mail (for up to 2 items)
- Current Canadian shipping costs are $35 via USPS Priority Mail (for up to 2 items)
The four fuse block adapters shown below are included.
CDR Repowering Rig
This product is being used in every state in the U.S., all Canadian Provinces as well as in Australia, Germany, the Grand Cayman Islands, and Korea.
This is the same CDR Repowering Rig that was previously offered (for over 10 years) with a purchase of the Bosch®CDR Tool from Crash Data Group.
Each CDR Repowering Rig kit includes a set of four fuse block adapters which will fit ATO, Mini, Micro2, and Micro3 automotive fuse sockets. The Mini fuse block adapter will work with vehicles that use the Low Profile Mini fuse.
The use of a the CDR repowering rig allows you to provide a source of power directly to a vehicles airbag control module (ACM). This is of value when a vehicles electrical system has been compromised. Alternatively, the ignition may be damaged or there might not be an ignition key available. Here is an overview video of how this item works. Note: The 12-volt plug contains one 10 amp glass fuse. The positive lead contains an inline fuse rated at 7.5 amps which should NOT be replaced with a larger size fuse.
This is the same CDR Repowering Rig that was previously offered (for over 10 years) with a purchase of the Bosch®CDR Tool from Crash Data Group.
Each CDR Repowering Rig kit includes a set of four fuse block adapters which will fit ATO, Mini, Micro2, and Micro3 automotive fuse sockets. The Mini fuse block adapter will work with vehicles that use the Low Profile Mini fuse.
The use of a the CDR repowering rig allows you to provide a source of power directly to a vehicles airbag control module (ACM). This is of value when a vehicles electrical system has been compromised. Alternatively, the ignition may be damaged or there might not be an ignition key available. Here is an overview video of how this item works. Note: The 12-volt plug contains one 10 amp glass fuse. The positive lead contains an inline fuse rated at 7.5 amps which should NOT be replaced with a larger size fuse.
Cost: $75 eachplus shipping (& sales tax in CA)
Multi-wire adapter
In some instances it may be necessary to provide power to more than one circuit in a vehicle when repowering for crash data retrieval .
This multi-wire adapter connects to your existing Repowering Rig (via the spade connector) and allows you to provide power to multiple circuits at the same time. The kit includes two methods of providing power for up to three circuits, and includes a set of the same fuse socket adapters (four total, shown below) that come with the Repowering Rig.
The smaller one piece adapter allows you to provide power to up to three circuits located in the same fuse panel with individual wires approximately six inches long. This adapter relies on the fuse protection from your Repowering Rig.
The larger adapter allows you to provide power to up to three circuits located in separate fuse panels with individual wires approximately six feet long. Each wire is individually fuse protected and comes with stackable banana plugs. The small adapter is used to connect the banana plug to the spade connector on your existing Repowering Rig. Note: The positive lead of each stackable extension contains an inline fuse rated at 5-amps which should NOT be replaced with a larger size fuse. Photos may not be representative of the actual item due to manufacturer component changes.
This multi-wire adapter connects to your existing Repowering Rig (via the spade connector) and allows you to provide power to multiple circuits at the same time. The kit includes two methods of providing power for up to three circuits, and includes a set of the same fuse socket adapters (four total, shown below) that come with the Repowering Rig.
The smaller one piece adapter allows you to provide power to up to three circuits located in the same fuse panel with individual wires approximately six inches long. This adapter relies on the fuse protection from your Repowering Rig.
The larger adapter allows you to provide power to up to three circuits located in separate fuse panels with individual wires approximately six feet long. Each wire is individually fuse protected and comes with stackable banana plugs. The small adapter is used to connect the banana plug to the spade connector on your existing Repowering Rig. Note: The positive lead of each stackable extension contains an inline fuse rated at 5-amps which should NOT be replaced with a larger size fuse. Photos may not be representative of the actual item due to manufacturer component changes.
Cost: $75 eachplus shipping (& sales tax in CA)
Fuse Socket adapters
If you have misplaced your fuse socket adapters, or simply desire to have an extra set you can purchase a set of the four sizes that are included with the Repowering Rig (ATO, Mini, Micro2, Micro3)
Cost: $15 (set of 4)plus shipping (& sales tax in CA